Calibration and Instrument Services
We Can Calibrate That
Calibration is a process involving the relationship between values of quantities indicated by a measuring instrument and a reference standard. It ensures the integrity and performance of your instruments, whether they’re large or small.
We’ve been calibrating instruments for decades. Over time we have found new and better ways to make your products run better. Because when your equipment runs better, it allows your operations to run more smoothly. We provide electrical, metallurgical, calibration and non-destructive testing for the utility industry. We’ve even branched out to commercial and industrial clients around the country.
Instrument testing is done both in-house and on-site. We calibrate to manufacturers’ tolerances or tailor it to your customized requirements. The goal is always to minimize down time while maximizing calibration confidence and client satisfaction. If we’re unable to calibrate or repair your equipment, we’ll arrange to subcontract equipment from among our approved suppliers. We’ll even pick up and deliver to most businesses with specific quantities and within a geographical location (i.e., the Midwest).
We are accredited by the American Association for Laboratory Accreditation (A2LA).
Our Calibration Services
Dimensional
|
Calipers |
Up to 36 in |
|
Length Standards |
Up to 39 in |
|
Micrometers |
Up to 36 in |
|
Rules & Scales |
Up to 60 In |
|
Step Blocks |
Up to 9 in |
|
Torque Arms |
5 to 60 in |
Electrical
|
AC Current- Source |
Up to 20.5 Direct |
|
AC Current- Source |
Up to 1000 Amp Turns |
|
AC Energy- ACV |
63 to 630 V |
|
AC Energy- Current- Direct |
0.2 to 200 A |
|
AC Energy- Frequency |
47 to 63 Hz |
|
AC High Voltage |
Up to 50 kV |
|
AC Voltage |
Up to 1000 V |
|
AC Voltage- Frequency |
Up to 30 MHz |
|
Capacitance- Measure |
10 aF to 11.11 µF |
|
Capacitance- Source |
0.19 nF to 110 mF |
|
DC Current- Source |
Up to 20.5 Direct |
|
DC Current- Source |
Up to 1000 Amp Turns |
|
DC High Voltage- Measure |
Up to 100 kV |
|
DC Resistance |
25 µΩ to 200 TΩ |
|
DC Voltage- Measure |
Up to 1100 V |
|
Frequency |
Up to 1.3 GHz |
|
Oscilloscopes- Bandwidth |
Up to 1100 MHz |
|
Phase Angle |
360 Degree |
Flow
|
Gas Flow |
0.005 to 1840 L/min |
Force
|
Force |
Up to 100 klbf |
Mass
|
Mass |
1 mg to 30 kg |
Optical
|
Light Meters- UV |
200 to 8k µW/cm2 |
|
Light Meters- Visible |
5 to 900 fc |
|
Optical Density |
0.1 to 4 d |
Pressure
|
Pressure- Hydraulic |
65 to 12000 PSI |
|
Pressure- Pneumatic |
-15 to 1000 PSI |
Specific Gravity
|
Specific Gravity |
0.6 to 1 sg |
Thermodynamic
|
Dew Point |
-15 to 30 C |
|
Relative Humidity |
10 to 90 %RH |
|
Temperature |
-194 to 660 C |
Torque
|
Torque Cells & Wrenches |
2.5 inlbf to 6500 ftlbf |
Vibration
|
Vibration- Frequency |
0.5 Hz to 15 kHz |
Amplifier
Analyzer-Cable
Analyzer-Distortion
Analyzer-FFT
Analyzer-Power
Analyzer-Signal
Attenuator
Bridge Capacitance
Bridge-Resistance
Calibrator-Multi-Product
Calibrator-Frequency
Calibrator-Process
Calibrator-RTD
Calibrator-Strain I
Calibrator-T/C
Capacitor-Standard
Capacitor-Decade
Centrifuge
Clock
Coil
Controller
Counter-Event
Current Interrupter
Current Probe
Current Transformer
Data Acquisition System
Data Recorder
Decade Capacitor
Decade Voltage Divider
Detector-Voltage
Divider-Resistive
Divider-Inductive
Encoder
Filter
Flaw Detector
Frequency Counter
Generator-Function
Generator-Signal
GPS Receiver
Ground Locator
Hipot
Holiday Detector
Hot Stick
Indicator-Strain
Inductor-Standard
Inverter
Load
Load Break
Load Buster
Megger
Megohmmeter
Meter
Meter-Amp
Meter-Capacitance
Meter-Clamp
Meter-Electrometer
Meter-Electrostatic
Meter-Electrostatic Field
Meter-Field
Meter-Ground Resistance
Meter-Impedance
Meter-LCR
Meter-Micro-ohm
Meter-Milli-ohm
Meter-Null
Meter-Ohm
Meter-Picoamp
Meter-Poly
Meter-Power
Meter-Process
Meter-Surface Resistance
Meter-Survey
Meter-Tan Delta
Meter-Volt
Meter-VOM
Meter- Watt
Meter-Watthour
Motor Test Set
Oscilloscope
Phase Detector
Phase Indicator
Power-Conditioner
Power Supply
Probe-HV
Recorder-Frequency
Recorder System
Resistor-Decade
Resistor-Standard
Scanner-Resistance
Scanner-Voltage
Scopecorder
Scopemeter
Shunt
Signal Conditioner
Source-Current
Standard-DC
Stop Watch
Stroboscope
Tachometer
Time Domain Reflectometer
Teraohmmeter
Tester-Battery
Tester-Burden
Tester-Circuit Breaker
Tester-Current Transformer
Tester-Dielectric
Tester-Ground Resistance
Tester-Igniter
Tester- Insulation
Tester-Meter
Tester-Oil
Tester-Relay
Tester-Turns Ratio
Thermal Voltage Converter
Timer
Transducer
- Balance
- Calibrator
- Comparator
- Crimper
- Durometer
- Dynamometer
- Extensometer
- Force Gage
- Force Transducer
- Load Cell
- Load Cell Tester
- Scale
- Scale-Crane
- Hydraulic Torque System
- Torque Arm
- Torque Multiplier
- Torque Screwdriver
- Torque Sys. W/ Disp.
- Torque Tester
- Torque Transducer
- Torque Wrench
- Weights & Weight Sets
- Accelerometers
- Amplifier-Charge
- Analyzer-Vibration
- Analyzer-Machinery
- Calibrator
- Meter-Vibration
- Signal Condition Amp
- Velocity Sensors
- Displacement Sensors
- Velocity Meter
- Calibrator-Sound Level
- Dosimeter
- Filter
- Meter-Sound Level
- Flaw Detector
- Ultrasonic Thick Gage
- Barometer
- Calibrator
- Calibrator-Pressure
- Calibrator-Process
- Controller
- DPI Cell
- Gage-Pressure
- Gage-Vacuum
- Manometer
- Meter-Flow
- Pressure Gage
- Pressure Meter
- Pressure Module
- Pressure Source
- Pressure Transducer
- Recorder
- Tester-Dead Weight
- Vacuum Gage
- Vacuum Gage System
- Calibrator
- Flowmeter
- Flowmeter System
- Leak Standard
- Leak Tester
- Meter-Gas
- Pump
- Rotameter
- Sonic Nozzle
- Tester-Air Flow
- Transmitter-Flow
- Bath
- Calibrator
- Calibrator-Infrared
- Calibrator-Thermocouple
- Calibrator-Thermometer
- Controller
- Data Acquisition System
- Datalogger
- Dry Block
- Dryer
- Environmental Chamber
- Furnace
- Oven
- Over-temperature Sensors
- Probe-Thermocouple
- PRT
- Recorder
- Refrigerator
- RTD
- SPRT
- Temp/RH Recorder
- Temperature DAQ
- Temperature Indicator
- Thermistors
- Thermocouple
- Thermocouple Ext. Wire
- Thermo-hygrometer
- Thermometer
- Thermometer- HGBT
- Thermometer-Infrared
- Calibrator
- Data Logger
- Dew Point Meter
- Environmental Chamber
- Humidity Generator
- Hygrometer
- Recorder
- Thermohygrometer
- Blocks–Setup
- Caliper
- Displacement Transducer
- Encoder
- Flow Cone
- Gage-Ring
- Gage-Thickness
- Gage-Bore
- Gage-Depth
- Gage-Go/No Go Plug
- Gage-Height
- Gage-Pit
- Gage-Plug
- Gage-Plug Go/No Go
- Gage-Ring
- Gage-Thickness
- Gage-Tube
- Inclinometer
- Indicator-Dial
- Indicator-Digital
- Level
- Macroscope
- Micrometer
- Micrometer Depth Gage
- Micrometer Head
- Micrometer-Inside
- Micrometer Rod
- Micrometer-Outside
- Micrometer-Stage
- Microscope
- Parallel Set
- Protractor
- Rule-Steel
- Step Block
- Tri-Square
- Detector
- Meter-Visible Light
- Meter-Ultraviolet
- Optical TDR
- Photometer
- Radiometer
- Densitometer
- Density Standard
- Density Strip
- Film Viewer
- Hydrometers
- Conductivity Meter
- Gas Detectors
- Gas Monitors
A World Leader in Smart Grid Testing
Our lab is the first in the country to be authorized to test synchrophaser devices for the Institute of Electrical and Electronics Engineers Standards Association (IEEE-SA) IEE C37.118.1a-2014. The Smart Grid Devices are about 100 times faster than the traditional grid measurement systems. This means grid operators can have realtime access to information needed to keep electricity flowing to homes and businesses. This information translates into more reliability, more efficiencies and more satisfied customers. We’re one of only a few companies in the world authorized to do this work. Let us put our knowledge to work for your company.
This service is not regulated by the Michigan Public Service Commission.
