We're experiencing intermittent issues with customers checking and reporting outages. We're sorry for any inconvenience & ask that you try again if you receive an error message the first time.

We're experiencing intermittent issues with customers checking and reporting outages. We're sorry for any inconvenience & ask that you try again if you receive an error message the first time.

We're experiencing intermittent issues with customers checking and reporting outages. We're sorry for any inconvenience & ask that you try again if you receive an error message the first time.

We're experiencing intermittent issues with customers checking and reporting outages. We're sorry for any inconvenience & ask that you try again if you receive an error message the first time.

We're experiencing intermittent issues with customers checking and reporting outages. We're sorry for any inconvenience & ask that you try again if you receive an error message the first time.

We're experiencing intermittent issues with customers checking and reporting outages. We're sorry for any inconvenience & ask that you try again if you receive an error message the first time.

Outage alert icon

As of: 7:58 AM, 10/12/24

Calibration and Instrument Services

We Can Calibrate That


Calibration is a process involving the relationship between values of quantities indicated by a measuring instrument and a reference standard. It ensures the integrity and performance of your instruments, whether they’re large or small.

We’ve been calibrating instruments for decades. Over time we have found new and better ways to make your products run better. Because when your equipment runs better, it allows your operations to run more smoothly. We provide electrical, metallurgical, calibration and non-destructive testing for the utility industry. We’ve even branched out to commercial and industrial clients around the country.

Instrument testing is done both in-house and on-site. We calibrate to manufacturers’ tolerances or tailor it to your customized requirements. The goal is always to minimize down time while maximizing calibration confidence and client satisfaction. If we’re unable to calibrate or repair your equipment, we’ll arrange to subcontract equipment from among our approved suppliers. We’ll even pick up and deliver to most businesses with specific quantities and within a geographical location (i.e., the Midwest).

We are accredited by the American Association for Laboratory Accreditation (A2LA).

Our Calibration Services


Dimensional

Calipers

Up to 36 in

Length Standards

Up to 39 in

Micrometers

Up to 36 in

Rules & Scales

Up to 60 In

Step Blocks

Up to 9 in

Torque Arms

5 to 60 in

Electrical

AC Current- Source

Up to 20.5 Direct

AC Current- Source

Up to 1000 Amp Turns

AC Energy- ACV

63 to 630 V

AC Energy- Current- Direct

0.2 to 200 A

AC Energy- Frequency

47 to 63 Hz

AC High Voltage

Up to 50 kV

AC Voltage

Up to 1000 V

AC Voltage- Frequency

Up to 30 MHz

Capacitance- Measure

10 aF to 11.11 µF

Capacitance- Source

0.19 nF to 110 mF

DC Current- Source

Up to 20.5 Direct

DC Current- Source

Up to 1000 Amp Turns

DC High Voltage- Measure

Up to 100 kV

DC Resistance

25 µΩ to 200 TΩ

DC Voltage- Measure

Up to 1100 V

Frequency

Up to 1.3 GHz

Oscilloscopes- Bandwidth

Up to 1100 MHz

Phase Angle

360 Degree

Flow

Gas Flow

0.005 to 1840 L/min

Force

Force

Up to 100 klbf

Mass

Mass

1 mg to 30 kg

Optical

Light Meters- UV

200 to 8k µW/cm2

Light Meters- Visible

5 to 900 fc

Optical Density

0.1 to 4 d

Pressure

Pressure- Hydraulic

65 to 12000 PSI

Pressure- Pneumatic

-15 to 1000 PSI

Specific Gravity

Specific Gravity

0.6 to 1 sg

Thermodynamic

Dew Point

-15 to 30 C

Relative Humidity

10 to 90 %RH

Temperature

-194 to 660 C

Torque

Torque Cells & Wrenches

2.5 inlbf to 6500 ftlbf

Vibration

Vibration- Frequency

0.5 Hz to 15 kHz

AC Source
Amplifier
Analyzer-Cable
Analyzer-Distortion
Analyzer-FFT
Analyzer-Power
Analyzer-Signal
Attenuator
Bridge Capacitance
Bridge-Resistance
Calibrator-Multi-Product
Calibrator-Frequency
Calibrator-Process
Calibrator-RTD
Calibrator-Strain I
Calibrator-T/C
Capacitor-Standard
Capacitor-Decade
Centrifuge
Clock
Coil
Controller
Counter-Event
Current Interrupter
Current Probe
Current Transformer
Data Acquisition System
Data Recorder
Decade Capacitor
Decade Voltage Divider
Detector-Voltage
Divider-Resistive
Divider-Inductive
Encoder
Filter
Flaw Detector
Frequency Counter
Generator-Function
Generator-Signal
GPS Receiver
Ground Cable
Ground Locator
Hipot
Holiday Detector
Hot Stick
Indicator-Strain
Inductor-Standard
Inverter
Load
Load Break
Load Buster
Megger
Megohmmeter
Meter
Meter-Amp
Meter-Capacitance
Meter-Clamp
Meter-Electrometer
Meter-Electrostatic
Meter-Electrostatic Field
Meter-Field
Meter-Ground Resistance
Meter-Impedance
Meter-LCR
Meter-Micro-ohm
Meter-Milli-ohm
Meter-Null
Meter-Ohm
Meter-Picoamp
Meter-Poly
Meter-Power
Meter-Process
Meter-Surface Resistance
Meter-Survey
Meter-Tan Delta
Meter-Volt
Meter-VOM
Meter- Watt
Meter-Watthour
Motor Test Set
Multimeter
Oscilloscope
Phase Detector
Phase Indicator
Power-Conditioner
Power Supply
Probe-HV
Recorder-Frequency
Recorder System
Resistor-Decade
Resistor-Standard
Scanner-Resistance
Scanner-Voltage
Scopecorder
Scopemeter
Shunt
Signal Conditioner
Source-Current
Standard-DC
Stop Watch
Stroboscope
Tachometer
Time Domain Reflectometer
Teraohmmeter
Tester-Battery
Tester-Burden
Tester-Circuit Breaker
Tester-Current Transformer
Tester-Dielectric
Tester-Ground Resistance
Tester-Igniter
Tester- Insulation
Tester-Meter
Tester-Oil
Tester-Relay
Tester-Turns Ratio
Thermal Voltage Converter
Timer
Transducer
Force
  • Balance
  • Calibrator
  • Comparator
  • Crimper
  • Durometer
  • Dynamometer
  • Extensometer
  • Force Gage
  • Force Transducer
  • Load Cell
  • Load Cell Tester
  • Scale
  • Scale-Crane
Torque
  • Hydraulic Torque System
  • Torque Arm
  • Torque Multiplier
  • Torque Screwdriver
  • Torque Sys. W/ Disp.
  • Torque Tester
  • Torque Transducer
  • Torque Wrench
Mass
  • Weights & Weight Sets
Vibration
  • Accelerometers
  • Amplifier-Charge
  • Analyzer-Vibration
  • Analyzer-Machinery
  • Calibrator
  • Meter-Vibration
  • Signal Condition Amp
  • Velocity Sensors
  • Displacement Sensors
  • Velocity Meter
Sound Level
  • Calibrator-Sound Level
  • Dosimeter
  • Filter
  • Meter-Sound Level
Ultrasonic
  • Flaw Detector
  • Ultrasonic Thick Gage
Pressure
  • Barometer
  • Calibrator
  • Calibrator-Pressure
  • Calibrator-Process
  • Controller
  • DPI Cell
  • Gage-Pressure
  • Gage-Vacuum
  • Manometer
  • Meter-Flow
  • Pressure Gage
  • Pressure Meter
  • Pressure Module
  • Pressure Source
  • Pressure Transducer
  • Recorder
  • Tester-Dead Weight
  • Vacuum Gage
  • Vacuum Gage System
Gas Flow
  • Calibrator
  • Flowmeter
  • Flowmeter System
  • Leak Standard
  • Leak Tester
  • Meter-Gas
  • Pump
  • Rotameter
  • Sonic Nozzle
  • Tester-Air Flow
  • Transmitter-Flow
Temperature
  • Bath
  • Calibrator
  • Calibrator-Infrared
  • Calibrator-Thermocouple
  • Calibrator-Thermometer
  • Controller
  • Data Acquisition System
  • Datalogger
  • Dry Block
  • Dryer
  • Environmental Chamber
  • Furnace
  • Oven
  • Over-temperature Sensors
  • Probe-Thermocouple
  • PRT
  • Recorder
  • Refrigerator
  • RTD
  • SPRT
  • Temp/RH Recorder
  • Temperature DAQ
  • Temperature Indicator
  • Thermistors
  • Thermocouple
  • Thermocouple Ext. Wire
  • Thermo-hygrometer
  • Thermometer
  • Thermometer- HGBT
  • Thermometer-Infrared
Humidity - Dew Point
  • Calibrator
  • Data Logger
  • Dew Point Meter
  • Environmental Chamber
  • Humidity Generator
  • Hygrometer
  • Recorder
  • Thermohygrometer
Dimensional
  • Blocks–Setup
  • Caliper
  • Displacement Transducer
  • Encoder
  • Flow Cone
  • Gage-Ring
  • Gage-Thickness
  • Gage-Bore
  • Gage-Depth
  • Gage-Go/No Go Plug
  • Gage-Height
  • Gage-Pit
  • Gage-Plug
  • Gage-Plug Go/No Go
  • Gage-Ring
  • Gage-Thickness
  • Gage-Tube
  • Inclinometer
  • Indicator-Dial
  • Indicator-Digital
  • Level
  • Macroscope
  • Micrometer
  • Micrometer Depth Gage
  • Micrometer Head
  • Micrometer-Inside
  • Micrometer Rod
  • Micrometer-Outside
  • Micrometer-Stage
  • Microscope
  • Parallel Set
  • Protractor
  • Rule-Steel
  • Step Block
  • Tri-Square
Optical
  • Detector
  • Meter-Visible Light
  • Meter-Ultraviolet
  • Optical TDR
  • Photometer
  • Radiometer
Densitometry
  • Densitometer
  • Density Standard
  • Density Strip
  • Film Viewer
Liquid Density (Specific Gravity)
  • Hydrometers
Chemical
  • Conductivity Meter
Confined Space Equipment
  • Gas Detectors
  • Gas Monitors

A World Leader in Smart Grid Testing


Our lab is the first in the country to be authorized to test synchrophaser devices for the Institute of Electrical and Electronics Engineers Standards Association (IEEE-SA) IEE C37.118.1a-2014. The Smart Grid Devices are about 100 times faster than the traditional grid measurement systems. This means grid operators can have realtime access to information needed to keep electricity flowing to homes and businesses. This information translates into more reliability, more efficiencies and more satisfied customers. We’re one of only a few companies in the world authorized to do this work. Let us put our knowledge to work for your company.

This service is not regulated by the Michigan Public Service Commission.

a2la logoieee standards

Have Any Questions?

Call 877-636-4147

Email Us

Connect with our Calibration Services team to learn more about our services or for a quote.

Email Us